Miami · South Florida
Custom Closets in Miami
Closet Detail is the direct manufacturer and installer of custom closets, kitchens and storage in Miami. We design it, build it in our own Miami workshop and install it with our own crew. No middleman, no markup.
Why Closet Detail
Custom closets built for Miami homes
Miami is not one kind of home, which is exactly why a template closet fails here. Inside the city limits alone we work in Brickell towers where a structural column eats into the bedroom wall, in Coconut Grove houses built long before anyone designed a bedroom around a walk-in, in new Edgewater units handed over with one rod and one shelf, and in Coral Way and Morningside homes with plaster walls that are not square anywhere you put a level. Wynwood adds a fourth problem: high ceilings, open plans and almost no interior wall to build against. Each of those gets measured with the same care and designed a completely different way.
Our workshop is in Medley, inside Miami-Dade, so a Miami project never leaves the county. Panels are machined on our CNC straight from the design file you approved, and then our own crew installs them. That matters more than it sounds. When a wall turns out to sit a few millimeters off what the tape said, a corrected panel is a drive across town instead of a reorder from a factory in another state, and the person explaining it to you is the person who built it.
We work through the whole house, not just the bedroom: walk-in and reach-in closets, kitchens, pantries, home offices, garage systems, laundry rooms, wall beds and media walls, in finishes that carry from room to room so the house still reads as one project when you do it a room at a time. Everything happens in English and Spanish, from the first call to the last adjustment. Miami projects also tend to run in phases, a bedroom now and the kitchen after the next renovation, so we keep the design file on hand to make the second phase match the first instead of approximate it. As the manufacturer and installer, we offer the best prices in South Florida, and every Miami project starts with a free estimate measured in your own home.
Thinking about a project in Miami?
Tell us the room and we come measure it. Free estimate, made to your space.
Questions
Good to know
Can you build custom closets in older Miami homes where the walls are not square?
Yes, and in Coconut Grove, Morningside and Coral Way it is routine. Older Miami houses were finished in plaster over uneven substrate, so a wall that looks straight is often out of plumb by a visible amount between the floor and the ceiling. We take measurements at several heights instead of one, then design filler panels and scribe strips into the piece so it meets the wall cleanly rather than leaving a wedge of daylight in the corner. The 3D design shows you exactly where those fillers land before a single panel is cut.
How close is your workshop to my home in Miami?
Our CNC workshop is in Medley, in northwest Miami-Dade, a short drive from most of the city. Being in the same county as the project is a practical advantage rather than a marketing line: measurements, design revisions and any extra panel move back and forth without shipping anything. It is also the reason our own crew installs, because they leave from the same building where your closet was built.
My Miami bedroom has a structural column and an angled wall. Can that still work?
Yes, and columns and odd angles are one of the strongest arguments for building custom instead of buying a system. Because every panel is cut to the dimensions in your approved file, a column becomes a deliberate break between two sections rather than a dead corner you lose, and an angled wall gets a section built to that angle. Off-the-shelf closet kits come in fixed widths, so they either stop short of the column or crash into it. We see this constantly in Brickell and Edgewater units and in Miami homes that were added onto over the years.
Can you build storage for a Wynwood or Edgewater loft with high ceilings and few interior walls?
Yes, and lofts usually call for a different strategy than a bedroom closet. With ceiling height to spare, the system runs taller and the top sections become long-term storage reached with a ladder or a pull-down rod. Where there is no wall to build against, a wardrobe run can become the divider itself, closed on the sleeping side and finished as a media wall or shelving on the living side. That kind of piece has to be designed as one object from the start, which is what the 3D stage is for.
Design your space in Miami.
Measured in your home, built on our own CNC in Medley and installed by our own crew. Free estimate, made to your space.